Feasibility Study of OFDM-MFSK Modulation Scheme for Smart Metering Technology

The Orthogonal Frequency Division Multiplexing based M-ary Frequency Shift Keying (OFDM-MFSK) is a noncoherent modulation scheme which merges MFSK with the OFDM waveform. It is designed to improve the receiver sensitivity in the hard environments where channel estimation is very difficult to perform. In this paper, the OFDM-MFSK is suggested for the smart metering technology and its performance is measured and compared with the ordinary OFDM-BPSK. Our results show that, depending on the MFSK size value (M), the Packet Error Rate (PER) has dramatically improved for OFDM-MFSK. Additionally, the adaptive OFDM-MFSK, which selects the best M value that gives the minimum PER and higher throughput for each Smart Meter (SM), has better coverage than OFDM-BPSK. Although its throughput and capacity are lower than OFDMBPSK, the connected SMs per sector are higher. Based on the smart metering technology requirements which imply the need for high coverage and low amount of data exchanged between the network and the SMs, The OFDM-MFSK can be efficiently used in this technology.Comment: 6 pages, 11 figures, ISGT Europe 201

A Link Quality Model for Generalised Frequency Division Multiplexing

5G systems aim to achieve extremely high data rates, low end-to-end latency and ultra-low power consumption. Recently, there has been considerable interest in the design of 5G physical layer waveforms. One important candidate is Generalised Frequency Division Multiplexing (GFDM). In order to evaluate its performance and features, system-level studies should be undertaken in a range of scenarios. These studies, however, require highly complex computations if they are performed using bit-level simulators. In this paper, the Mutual Information (MI) based link quality model (PHY abstraction), which has been regularly used to implement system-level studies for Orthogonal Frequency Division Multiplexing (OFDM), is applied to GFDM. The performance of the GFDM waveform using this model and the bit-level simulation performance is measured using different channel types. Moreover, a system-level study for a GFDM based LTE-A system in a realistic scenario, using both a bit-level simulator and this abstraction model, has been studied and compared. The results reveal the accuracy of this model using realistic channel data. Based on these results, the PHY abstraction technique can be applied to evaluate the performance of GFDM based systems in an effective manner with low complexity. The maximum difference in the Packet Error Rate (PER) and throughput results in the abstraction case compared to bit-level simulation does not exceed 4% whilst offering a simulation time saving reduction of around 62,000 times.Comment: 5 pages, 8 figures, accepted in VTC- spring 201